Polyx®-Oil Effect Raw - Raw

Polyx®-Oil Effect Raw - Raw

Reference: 3044

VAT included


Osmo Polyx®-Oils are developed from natural oils and waxes to provide the most hardwearing and durable protection for wooden flooring and furniture. Untreated wood in its original form has a light, pale character from its natural 'raw' appearance. Sanded wood also has the same effect. Osmo Polyx®-Oil 3044 Raw is designed to retain this appearance by using a small amount of white pigments to neutralise the permanent 'wet-look' that develops after application of a clear finish. Apply very thinly and brush out any white pigments from the surface before leaving to dry to acheive the desired results.



  • Approx. coverage: 30m²/L with one coat
  • No. of coats: 1 coat + 1 coat of Polyx®-Oil Original
  • Application temperature: +5°C
  • Drying time:  8-10hrs.
  • Sizes: 0.125L, 0.750L, 2.5L


  • Nearly invisible appearance, no 'permanent wet effect'
  • Light coloured wood stays light coloured
  • Extremely durable and hardwearing
  • Very water and dirt resistant
  • Resistant to common liquid spillages such as water, juice, tea, cola and wine
  • Saliva-resistant and sweatproof, suitable for children's toys
  • Microporous, breathable finish which does not crack, peel or flake
  • No sanding necessary for spot repairs or future applications


  • For ingredient-rich hardwoods species use Osmo Wood Wax Finish Extra Thin.
  • Polyx®-Oil Raw is designed for sanded or raw wood only - not suitable for dark wood species.
  • Recommended application is 30ml/m².
  • If excessively applied, or if the surface has been sanded to a very fine grade of sandpaper - the white pigments can show visibly in some areas. In this scenario, the remedy is to sand the surface and finish with P120 and apply very thinly along the grain and spread well.
  • For best results, apply Osmo Polyx®-Oil Original as the second coat. This will also determine the final sheen, whether a 3011 Glossy, 3032 Satin, 3065 Semi-matt or 3062 Matt finish is required.
  • Multi-purpose cleaners such as washing up liquids and detergents are highly detrimental to the finished surface and is not recommended to be used as discolouration or staining may be possible.
  • Other household cleaning products such as vanish, bleach, baking soda etc. are likely to cause severe discolouration or staining.

Specific References


Polyx Oil Effect - Safety

Download (185.59k)

Polyx Oil Effect - PI

Download (617.23k)

16 other products in the same category: